G5 Voodoo Neo 6

  • G5 Voodoo Neo 6 -
  • Artikelcode:

€ 3.050,00 incl.VAT€ 2.520,66 (excl. 21% VAT)

PRODUCT DESCRIPTION

G5 Voodoo Neo 6
The next generation of engine management for many more engines.


The G5 Voodoo Neo 6 can run:
8 cylinders port or direct injection and direct spark, or,
6 cylinders with direct/port staged injection, and direct spark


The G5 Voodoo processing units are the perfect choice for professional level motorsport.

In the box:

 

  • G5 Voodoo Neo 6 ECU
  • USB-C Connection Cable
  • WiFi Antenna
  • 4m GPS Antenna (Magnetic or Adhesive Mount)
  • USB-C and SMA Dust Covers
  • QuickStart Guide (A5)
  • Installer I/O table (A3)
  • Link stickers

 

Specifications:
Inputs/Outputs

  • Control up to 8 cylinders with port or direct injection and direct spark, or 6 cylinders with direct/port staged injection, thanks to: 12 injector pins,8 ignition pins,6 aux. output pins,(4 Aux pins are shared with 4 DI Pins. You can only use each pin for either Injection or DI, not both at the same time.), 6 ADIO pins
  • Highly customisable IO, using 2 types of multi purpose pins: ADIO pins, and Aux./Digital-Input pins. These pins can act as inputs or outputs.
  • ADIO are a unique pin type. ADIO can act as an Aux Output (switched or PWM), as an Analogue Input, or as a Digital Input, but cannot read PWM/frequency.
  • Neo 4 has Aux/DI pins which are used as either an Aux pin, or a Digital Input pin. They can read PWM/frequency.
  • Any unused injector/ignition pins can be used as an auxiliary pin
  • All ignition and auxiliary pins are back feed protected.
  • 3 analog inputs
  • 10 digital inputs
  • 4 temperature inputs
  • 2 knock inputs
  • 2 trigger inputs
  • 1 x wideband lambda controller
  • Dual H-Bridge e-throttle control
  • Dedicated ignition switch pin
  • 5v sensor supply
  • CAN 1 via Weipuconnector. CAN connector now supplies power and ground.

 

Communications

  • USB-C (cable included)
  • Power over USB
  • WiFi: Connect directly to the ECU via built-in Wifi Access Point, or add it to an existing network (antenna included)
  • CAN: New WEIPU connector supplies power for CAN devices
  • Ethernet: Built in ethernet which can function like USB. Also adds the ability to connect to the ECU over a network.
  • GPS: Functional when GPS antenna connected (antenna included)

 

Data Logging

  • 1gb logging capacity
  • Logging over WiFi
  • 100kHz max. total logging rate
  • 250 logging channels

Size & Weight
  • Length: 107mm (4.21 inches)
  • Width: 158mm (6.22 inches)
  • Max side height: 45mm (1.77 inches)
  • Weight: 730grams (25.75 ounces)

 

Mounting

  • 4x M5 threaded mount holes on the sides for bracket mounting
  • 4x M5 threaded mount holes on the underside for clean mounting
  • 4 x 5.5mm unthreaded through holes for mounting through (designed for use with M5 bolts)

 

 

If more information is needed, do not hesitate to concact us!